Skip to content. | Skip to navigation

Personal tools

Navigation

Questions or Comments:
airperm@tceq.texas.gov
You are here: Home / Permits, Registrations, and Reporting / Air Permits / Guidance / NSR / Coating Manufacturing Operations / NSR Guidance for Coating Manufacturing Operations

NSR Guidance for Coating Manufacturing Operations

Overview of air permitting requirements and options for new coating-manufacturing operations. Links to relevant rules, guidance, and forms.

This information is intended to be used by permit applicants to help ensure a complete application and expedited application review. We encourage applicants to use this information when preparing and submitting NSR applications to promote faster action by the agency.

Common Information

Potential Additional Sources

The following are additional facilities that are commonly permitted during a permit action for the facility:

  • Title 30, Texas Administrative Code, Section 106.478 - Tanks, Storage and Loading
  • 30 TAC Chapter 115 - Control of Air Pollution from Volatile Organic Compounds
    • Subchapter B: General Volatile Organic Compound Sources
      115.112 Storage of Volatile Organic Compounds
  • 40 CFR 60 Subpart Kb - Volatile Organic Liquid Storage Vessels
  • Facility Checklists:
  • 106.183 - Boilers, Heaters, and Other Combustion Devices
  • Standard of Permformance for New Stationary Sources (NSPS)
  • Table 4 Adobe Acrobat PDF Document
  • Table 6 Adobe Acrobat PDF Document

    Best Available Control Technology (BACT)

    The following tables contain information regarding the level of emissions control required or the amount of emissions allowed from the facility.

    • Current BACT Adobe Acrobat PDF Document
    • 10-Year-Old BACT Adobe Acrobat PDF Document - Some authorizations for qualified facilities allow for air pollution control methods that are at least as effective as the BACT that was required or would have been required 120 months, or 10 years, ago.
    • Current MSS BACT Adobe Acrobat PDF Document

    Boilerplate Conditions

    The following are examples of permit conditions that may be applicable for this type of facility:

    • Paint Manufacturing Operations Adobe Acrobat PDF Document or Microsoft Word Document

    Additional Information

    Questions? We Can Help

    If you have questions regarding this guidance please contact us.